English

AODELAN

Product Info

Pebble Wireless Remote Shutter Control-Black

PEBBLE Wireless Shutter Remote consists of a transmitter and receiver. The transmitter can control the receiver wirelessly to perform autofocus, single shot, delayed release, continuous release. The receiver can also be used as a wired shutter remote to do autofocus, single shot, and continuous release.

0.00
0.00
  
Product Description

PEBBLE Wireless Shutter Remote consists of a transmitter and receiver. The transmitter can control the receiver wirelessly to perform autofocus, single shot, delayed release, continuous release. The receiver can also be used as a wired shutter remote to do autofocus, single shot, and continuous release.


Using the Receiver as a Wired Remote without transmitter
1. Turn off the camera and receiver.
2. Connect one end of the cable to the camera’s remote port, and the other end to the receiver’s remote release terminal.
3. Turn on the camera and receiver.The shutter button will function exactly the same as the camera’s shutter: A half-press
     of the shutter button will autofocus. A full press will take a photo. When the camera is set to continuous shooting mode,
     press and hold the shutter button will take photos continuously.



Note: The wired shutter release function is available when the receiver is turned off and even without batteries.

Using the Transmitter as a Wireless Remote

1.   1. Connect one end of the shutter release cable to the camera’s remote port, and the other end to the receiver’s remote release terminal.

2.   2. Turn on the camera and receiver.

3.   3. Half press the shutter button on transmitter to autofocus. The indicators on the transmitter and receiver will light green simultaneously.

4.   4. Fully press the shutter button to take a photo. The indicators will turn red simultaneously.

5.   5. Pressing the delay button will take a photo in a 3 second delay. The indicator on transmitter lights red. The indicator on receiver will blink
     green and orange in sequence, and turn red when taking the photo.

6.   6. Set the camera to continuous shooting mode. Press and hold the shutter button on transmitter until the indicator turns off, and then let go
     off the button. The camera will perform continuous shooting. To end the continuous shooting, press the shutter button on transmitter.




Frequency

2.4GHz

Power Supply

1 pc of CR2032 batteryTransmitter;

2 pcs of AAA alkaline/ NI-MH batteriesReceiver

Transmission Distance

 

80m+ Open space without interference

Dimension

L 67 * W 36 * H 13 mmTransmitter;

L 90 * W 41 * H 32 mmReceiver

Weight

13gTransmitter; 37gReceiver—Excluding batteries

CONTACT
SEARCH 
NAV

TEL: +86-755-61116102 / +86-15118107353

Mail: roderick@fudasi.com

Address: Area B, Floor 3, 

No. 57 Langkou Industrial Park, 

Langkou Community, Dalang South Road, 

Dalang Sub-district, Longhua District, 

Shenzhen, 518109

China

COPYRIGHT © 2019 SHENZHEN AODELAN TECHONLOGY CO,LTD